I'm having trouble milling on subspindle on Mazak Integrex 100Y.
I'm probably missing some G and M codes ,or these that I use are misplaced.
I'm using Gibbs 8.0,and the post is not perfect for this machine.
Milling on Main Spindle works OK.
Below I'm posting tape code for milling operation on Main Spindle (working fine),and Subspindle (not working).
When I simulate tool path it works,but running prog,alarms out,
with message about B axis not locked.
Please take a look at my code ,and tell me what's wrong
Milling Mode Code Presentation on Main Spindle (working)
( OPERATION 7, HOLES )
( RGH_TURN_MAIN_SP )
( TOOL ID 6, 1. DIA. CENTER DRILL )
( #1 CARBIDE CENTER DRILL #002.152 )
( CS#9 - GATE1 )
( MAIN SPINDLE )
N134T0606.8B12
N135G53P1
N136M302
N137M200
N138G50W0.
N139G110C1
N140G0C0.
N141G97S2500M203
N142M250
N143B15.
N144M251
N145G125X2.694Y0.Z-3.467R1
N146G17
N147G0G98X0.Z5.66C0.M8M153
N148Y0.
N149Z2.5
N150G83X0.Y0.C0.Z-.5R0.F20.M210
N151C-120.
N152C-240.
N153G80G0Z2.5
N154Z5.66
N155G69.5
N156G30P1V0.
N157G30P1U0.
N158G30P1W0.
N159M9M154
N160M205
N161M1
Milling Mode Code Presentation on Sub Spindle (NOT working)
( OPERATION 22, HOLES )
( MAIN SPINDLE )
( TOOL ID 6, 1. DIA. CENTER DRILL )
( #1 CARBIDE CENTER DRILL #002.152 )
( CS#6 - XY PLANE )
( SUB SPINDLE )
N412T0606.15B18
N413G53P1
N414M300
N415M200
N416G50W#605
N417G110C2
N418G0C0.
N419G97S2240M203
N420M250
N421B180.
N422M251
N423G17
N424G0G98Z-2.5M8M153
N425G112M19S0
N426X0.
N427Y0.
N428G83X0.Y0.Z2.R0.F360.M210
N429G80G0Z-2.5
N430G30P1V0.
N431G30P1U0.
N432G30P1W0.
N433G28W0.
N434M9M154
N435M205
N436M1