[Tutu]

I didn't use my machine for 6 months when I tried to power the spindle up it blows the fuses in my plugs

So I disconnected the spindle and VFD powers on OK

So I bought a new spindle 2.2kw same rating 220v as the old spindle had to change the plug on it as new spindle was and checked the continuity on everything and now I get this error code


any ideas what could be wrong?

[MARV]

All things being equal between spindle motors, I would extend the acceleration ramp up time in the parameters.

[dazp1976]

Same as MARV.

Wondering if all the settings have gone back to default after being off so long.

[Tutu]

All things being equal between spindle motors, I would extend the acceleration ramp up time in the parameters.

Do you know how I do it? I'm so confused with the Chinglish manual

It's the standard Huanyang VFD

Thanks

[Tutu]

So I checked and I have a D223B what do I actually do to change these settings?

And are these the settings I need to change to change the Ramp up?

And what should I change them to?

[Tutu]

Maybe these setting's are the ones?


What are sensible settings?