Agree with Jim on all counts.
BTW, the HS spindle motors are also 2 pole 3ph asynchronous motors, 24krpm on 400Hz.
They have to be ran typically at >6krpm due to possessing very low inductive reactance below this speed and frequency
Results 1 to 12 of 12
Threaded View
-
05-25-2021, 07:05 PM #7
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24223
Re: VFD to run a air compressor. Proper hookup
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With QuoteSimilar Threads
-
Air Pump/air compressor for laser engraving/cutting machine
By lasertube in forum Commercial LaserReplies: 0Last Post: 04-30-2018, 04:59 PM -
Running an Air Compressor with a VFD.
By TheDeon in forum Phase ConvertersReplies: 25Last Post: 10-30-2017, 01:25 PM -
Hailea air compressor/air pump for laser engraver/cutter machine
By laser tube in forum Commercial LaserReplies: 0Last Post: 04-06-2017, 12:38 AM -
HAILEA AIR COMPRESSOR/AIR PUMP FOR LASER ENGRAVER/CUTTER MACHINE
By lasertube in forum For Sale OnlyReplies: 0Last Post: 03-20-2017, 08:31 PM -
Need new Air Compressor.
By Kanman in forum MetalWork DiscussionReplies: 6Last Post: 12-31-2012, 08:02 PM
Tags for this Thread
Posting Permissions
