Re: Hand Pendant code .
Originally Posted by
Yaryk
My CNC mill little MPG Pendant Pathpilot for the most necessary functions.
1.Axis Zero.
2.Axis SELECT (X Y Z A)
3.Coolant (ON / OFF)
4.5-MODE SELECT (CONT, 0.001, 0.01.0.1, 1.0)
5.Program Start / Resume
6.Program PAUSE.
7.Mpg / Encoder 100PPR
8.Program Stop.
9.4-Mode SELECT (Override) (Feedhold, Maxvelocity, RPM, JOG)
10. Reset.
Works with standard screen resolution 1024x768. Does not require connection via HAL. (There is variate and via Hal. The second system sees as GamePad.) Works on the Pathpilot 1.xxx and 2.xxx versions.
https://youtu.be/Abv31uO3qfA
Looks great! good job...
Can you provide details on how you implemented this in the pathpilot config? Files maybe?
Thanks,
Scott...
Instructional Videos for CNC Guitar Building
http://www.rmgvideos.com