I purchased a 2001 Fadal 6535, it’s supposed to have 65x35x 34” travel.
On the Z axis it will only descend 28” instead of 30”. I’ve changed the software module to a newer one (version 103.5) with no change on the distance of travel.
I will attach pictures of the z axis motion board along with the cpu that shows software versions and EPROMs. Any help is greatly appreciated, I don’t want to run extended length tool holders to be able to reach parts or create sub plates to bring the table height up. I’d like to be able to use the t slots and keep the rigidity in tooling.