Tom
JOG3=66.66 click Send seems like a delay of a second then ramps up to approx. 1500 rpm then down to 800 rpm over another second then stabilizes at 1000rpm
VFD is a Lenze 534 speed controller
according to the manual i have found online acceleration time is 1-10 S which is really slow unless i am missing something
sean
Thread: DAC Spindle Speed Feedback
Results 1 to 20 of 23
Hybrid View
-
07-19-2021, 08:21 PM #1
- Join Date
- Jul 2018
- Posts
- 47
Re: DAC Spindle Speed Feedback
Reply With QuoteSimilar Threads
-
Inverter Speed Reference & Encoder Feedback
By lukebarber in forum Tormach Personal CNC MillReplies: 0Last Post: 01-17-2019, 12:18 AM -
Mazak QT10 missed the feedback of speed spildle
By gorkthor in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 10-05-2018, 01:49 PM -
Spindle Interference on Kanalog DAC ground causing Kflop Step issues?
By slimneill in forum Dynomotion/Kflop/KanalogReplies: 8Last Post: 01-06-2016, 01:41 AM -
Help chosing a spindle speed sensor to indicate spindle speed in mach3
By Draax in forum Mach LatheReplies: 1Last Post: 08-02-2013, 10:07 PM -
AC servo run at constant speed without feedback?
By jsheerin in forum Servo Motors / DrivesReplies: 12Last Post: 03-10-2010, 02:25 AM
Tags for this Thread
Posting Permissions
