4 power wires out of the brushed servo. 1 ground wire
i followed them to the board and at the terminal strip they were paired with lugs.
so i am assuming they have a basic + and - power requirement
Results 1 to 11 of 11
Hybrid View
-
08-23-2021, 06:25 PM #1
Registered
- Join Date
- Oct 2009
- Posts
- 230
Re: looking for 10m servo wire color identify
shizuoka an-s knee mill=kflop/kanalog running nema 34 dc brushed servos
cincinnati sabre 750=kflop/kanalog building now with ac brushless servos
Reply With QuoteSimilar Threads
-
Stepper Motor Wire Color Configuration
By Cornelius3D in forum Stepper Motors / DrivesReplies: 8Last Post: 01-20-2013, 06:43 PM -
Are the wire color of stepper motors standardized?
By HereinCS in forum DIY CNC Router Table MachinesReplies: 1Last Post: 01-22-2011, 11:30 PM -
motor wire color in cnc conversion
By MPaulHolmes in forum Benchtop MachinesReplies: 13Last Post: 08-10-2009, 12:19 AM -
Wire color code HP laserjet II steppers
By rustranch in forum Stepper Motors / DrivesReplies: 3Last Post: 02-14-2005, 05:40 AM -
Wire Color
By HillBilly in forum CNC Machine Related ElectronicsReplies: 1Last Post: 07-26-2004, 06:04 PM
Tags for this Thread
Posting Permissions
