I have not tried that but I definitely will if you think its worth a shot.
"your C10 Breakout Board does not have a PWM to Analog converter, so it has no way to process the PWM from Mach3 to give you the output you need. it's a very basic Breakout Board"
That's a little confusing to me. I thought Mach estimated that frequency then the Smooth Stepper converted that voltage not the breakout?
Very odd because I was told this board would definitely work with PWM by someone that teaches classes on these panels BUT with that said I have not ever been able to change this voltage.
Can you recommend to me a board that will work with 0-5v and work with the Smooth Stepper? It appears that the C11G could be a direct replacement for the C10 and connect to the Smooth Stepper. If you thought this was a good option and fairly easy I would get it to try?
https://www.automationtechnologiesin...ard-for-mach-3