Hello,,this project success sir?because we want make this driver for controll my cnc,,do you have any idea
Hello,,this project success sir?because we want make this driver for controll my cnc,,do you have any idea
Hi Mihai & all,
It seems an excellent work Mihai, I want to try it , do you still could share you source code and Eagle pcb.. ,I hope it Not too late .
I can't access to the link attached ,eany one can help?
Thanks ®ards
Hi Mihai & all,
It seems an excellent work Mihai, I want to try it , do you still could share you source code and Eagle pcb.. ,I hope it Not too late .
I can't access to the link attached ,eany one can help?
Thanks ®ards
Hello,
I have make this pcb with the atmega644 and try to test to firmware 1.4 and 1.5. I upload the hex and the eprom file via avrdudess and try to communicate with the bord via FT232.
The wiring i supose GND->GND and RX->TX and TX ->RX from the ft232 to the servo driver bord. For the speed of the 232 i have no idee.
When i ask the status in the tuner program i have alway "no respons" Have you any hints ?
Thank you in advance