[arturod]

For use with the C34 boards, we strongly recommend you use the C82:
https://www.cnc4pc.com/c82-dual-port...n-board-b.html
You can open a ticket in our website and we may be able to help you with this:
https://www.cnc4pc.com/contact

Arturo Duncan
https://cnc4pc.com

[dazp1976]

For use with the C34 boards, we strongly recommend you use the C82:
https://www.cnc4pc.com/c82-dual-port...n-board-b.html
You can open a ticket in our website and we may be able to help you with this:
https://www.cnc4pc.com/contact
Arturo Duncan
https://cnc4pc.com

You keep making/updating add-on boards to connect to boards like the c11 but.....
Instead of ending up with little add-ons everywhere as we grow machines and making it messy....
Can't you just update a new main board with the new connection types and pcb designs built in?.
Just like cncroom have with the MB3.

By the time we've bought all these main expansions, little RJ45 modules and other extras, we could've bought a nice Acorn setup.

[arturod]

It all depends on the application. For simpler setups, you can use the C25XP which uses terminals:
https://www.cnc4pc.com/c25xp-smooth-...ted-board.html
For wiring more complex drives, the connector boards make it easy and safe for many. Check out what this guy did and how simple he wired such a complex machine:
https://www.youtube.com/watch?v=RDm_yBJA9Yk

Arturo Duncan
https://cnc4pc.com