[cnc.techie]

you can simply transfer the Dripfeed chips what we call the system eproms to your new master pcb(A16B-1000-0010 ).do ensure that the small links/jumpers are kept as the original master pcb(A16B-1000-0010 ).

[copper460]

you can simply transfer the Dripfeed chips what we call the system eproms to your new master pcb(A16B-1000-0010 ).do ensure that the small links/jumpers are kept as the original master pcb(A16B-1000-0010 ).

Thank you cnc.techie. I appreciate your response. Second Question: I see the A16B-1000-0010 board ending with 07f, in my case. I am guessing that this is a revision level for the board. Would a board ending in 08f or 09f work? Ideally I would prefer to match everything exactly, but we don’t always get what we want.

Thank you again.

[zavateandu]

yes it will work
what is written after the ""/"" does not matter,indeed revision of the repair

[copper460]

Thank you zavateandu

[cnc.techie]

Yes you can simply ignore what is written after the /
Thnks