Hello, I need advice, I want to create PGM in the machine HAAS VF1 1998 where I want to use the parameters of variables #
the problem is that when I send a program with a PC, the automaton writes me an error of the type that it does not know the codes and puts them in parentheses as text.
Example 1 part of a program sent with a PC:
O00050
(lever for movement in the left corner)
G91
G54
# 1 = 1;
# 2 = 50.5;
# 3 = 30.7;
# 4 = 20;
G # 1 X [# 1 + # 2] Y # 3 F # 4;
G01 Y-3.75 F75.
Example 2 of the program displayed on the machine:
O00050
(lever for movement in the left corner)
G91
G54
(# 1 = 1;?)
(# 2 = 50.5 ;?)
(# 3 = 30.7 ;?)
(# 4 = 20 ;?)
What am I doing wrong or am I missing a macro?
Thank you in advance for your advice
I want to create a program for probing an X-Y circuit.
And I need the variables to always enter the dimension of the part in the X-axis and in the Y-axis
and he didn't have to rewrite it throughout the program.
I apologize for the language