It could also be something mechanical that has a relation to the spindle.
What is the pitch of the spindles you are using?
What is the "pitch" of the pattern in the 45° cut?
How is de motor connected to the spindle?
Thread: Bad cut on angled lines and arc
Results 1 to 20 of 37
Threaded View
-
06-13-2022, 12:13 PM #7
Registered
- Join Date
- Mar 2015
- Posts
- 426
Re: Bad cut on angled lines and arc
Reply With QuoteSimilar Threads
-
Machine can't cut straight angled lines.
By shawnmelton in forum Avid CNCReplies: 3Last Post: 03-10-2019, 04:29 AM -
V-groove bearings on flat or 45 angled profile - bad idea?
By Spikes in forum DIY CNC Router Table MachinesReplies: 2Last Post: 03-28-2018, 03:34 PM -
MasterCam X arc or many lines...?
By skmetal7 in forum MastercamReplies: 5Last Post: 08-26-2014, 08:20 PM -
problem with angled cut
By da_Rayman in forum CNC Plasma / Oxy Fuel Cutting MachinesReplies: 19Last Post: 11-22-2012, 09:28 AM -
NOT break arc into lines
By cncuser1 in forum MastercamReplies: 8Last Post: 05-08-2008, 02:48 AM
Tags for this Thread
Posting Permissions
