587,758 active members*
4,507 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Tormach Personal CNC Mill > Tormach PathPilot™ > New Device to control FEED/RPM/VELOCITY overrides in PathPilot

Thread: New Device to control FEED/RPM/VELOCITY overrides in PathPilot

Results 1 to 12 of 12

Hybrid View

  1. 07-16-2022, 05:12 PM #1
    kstrauss
    kstrauss is offline Junior Member
    Join Date
    Apr 2013
    Posts
    1788

    Re: New Device to control FEED/RPM/VELOCITY overrides in PathPilot

    Agreed. Tormach includes drivers for all devices required to control FEED/RPM/VELOCITY overrides as part of their standard distro. No additional code required.
    Reply With Quote Reply With Quote
  2. 07-16-2022, 05:53 PM #2
    sagreen
    sagreen is offline Registered
    Join Date
    Mar 2009
    Posts
    388

    Re: New Device to control FEED/RPM/VELOCITY overrides in PathPilot

    Quote Originally Posted by kstrauss View Post
    Agreed. Tormach includes drivers for all devices required to control FEED/RPM/VELOCITY overrides as part of their standard distro. No additional code required.
    I wouldn't call them Tormach Provided "drivers". One can create a usb device that emulates Tormach's operator console to extend these controls to another device. If all you want is to do is emulate that device, its not difficult.

    Scott...
    Instructional Videos for CNC Guitar Building
    http://www.rmgvideos.com
    Reply With Quote Reply With Quote
  3. 07-16-2022, 08:15 PM #3
    kstrauss
    kstrauss is offline Junior Member
    Join Date
    Apr 2013
    Posts
    1788

    Re: New Device to control FEED/RPM/VELOCITY overrides in PathPilot

    I probably should have written "provides support" rather than "provides drivers".
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Pathpilot on Lathe, displaying actual RPM
    By sagreen in forum Tormach PathPilot™
    Replies: 7
    Last Post: 01-26-2022, 03:04 PM
  2. Reset Feed & RPM overrides with gcode
    By scott216 in forum Tormach PathPilot™
    Replies: 2
    Last Post: 11-18-2015, 10:56 PM
  3. FANUC Oi MATE TD - Chuck turns at 840 rpm, control shows 1000 rpm
    By DiegoCNC in forum Fanuc
    Replies: 4
    Last Post: 02-21-2014, 02:26 AM
  4. Feed rate does not match motor velocity
    By itko in forum Mach Software (ArtSoft software)
    Replies: 3
    Last Post: 05-10-2013, 12:14 PM
  5. 2-axis cut control - Speed/feed calculator RPM too high
    By Neil_J in forum Surfcam
    Replies: 10
    Last Post: 09-08-2007, 05:40 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules