Hi,
According FANUC 2GB, see attachment.
We run some programs up to 3MB without problems.
If you have the 0i-series I can make a BIN-file for you that you can try on a CF-Card.
On our 21i-MB and 18i-TB it doesn't work.
You didn't tell me what control you have.
Regards,
Heavy_Metal.
Thank you very much
0i-MD & 0i-MC
Hi,
Ok, the 0i-MD will work, the 0i-MC you have to try.
When you have 400 program limit as standard on your control the max on the card will be 63 folders or files.
The option 500 or 1000 folders or files in the card-program is an extra ( paid ) option, on Card side and control side.
You need nc-files without extension, just like the M198 (CF-Card) option.
Regards,
Heavy_Metal.
Our main problem is editing cutting modes (feed and speed) in large programs. It is possible to do with FANUCPRG ?
Hi,
Yes, thats possible, you can edit and change the code on control-side.
After that you can drag and drop your new program back to pc via card-tool and save it on HD.
For more info on this item you can also look on this Doosan forum :
https://www.cnczone.com/forums/daewo...ck-5700-a.html
Regards,
Heavy_Metal.
Hi guys, Heavy_Metal solved this issue for me a while back. Turns out my CD copy of the pc editing tool was bugged. I can now drag files back off of the card and onto wherever I choose.
Thanks again
Hello everyone, can someone send me FANUCPRG.exe. Txc
Hey cnczone77,
You need at least a Fanuc 0i-D series or a Fanuc 30i-32i series to run these BIN-files which are created by the program.
Check the FANUC forum for more info: https://www.cnczone.com/forums/fanuc/412886-cnc.html
When you have a 0i-D Series you need the A02B-0319-R642 ( 0i-TD - Lathe ) or A02B-0320-R642 ( 0i-MD - Mill ) to run these BIN-files.
Activation of that R642 option is around €700,- / $850,- (USD) but you always can try a BIN-file before you want to buy the program.
Program costs only €20,- in Europe, that's $24,- (USD), exclusive shipping, so pretty cheap
Hi
I have control oi md milling machine how can i use fanucprg.exe.
With thanks
Hey guys,
What did you do to fix the "There is insufficient disk space" problem when trying to drag a file to desktop? I've tried multiple editing software disks that each came with our lathes and get the same error on all. Any insight would be much appreciated!
Do you run the edit program-tool straight from the software disk ?
Be sure you run the FANUCPRG.exe file from Harddisk or USB-stick to drag files back to PC.
Put the small software in a folder or an a stick and make a shortcut for it to your desktop.
Regards.
You're welcome.
Regards.
Hello friend. I would like to test Program Transfer tool Fanuc software, could you post it here?
id be interested in a bin-file to test on my machine we have Fanuc Oi-MD controller and starting to get into CAD/CAM so files are getting large. also is there a vendor I can buy from in UK do you have link to purchase?
Last edited by dp28688; 07-21-2022 at 03:10 PM.