Mactec54
This is another post I use.
( SADIE V CUT3 )
( File created: Wednesday October 12 2022 - 02:51 PM)
( for Mach2/3 from Vectric )
( Material Size)
( X= 34.000, Y= 13.000, Z= 0.750)
()
(Toolpaths used in this file
(SADIE V CUT2)
(Tools used in this file: )
(5 = V BIT 60)
N100G00G20G17G90G40G49G80
N110G70G91.1
N120T5M06
N130 (Tool: V BIT 60)
N140G00G43Z0.8000H5
N150S12000M03
N160(Toolpath:- SADIE V CUT2)
N170()
N180G94
N190X0.0000Y0.0000F100.0
N200G00X0.8238Y-1.5406Z0.2000
N210G1X0.8238Y-1.5406Z-0.0625F30.0
N220G1X0.8296Y-1.4952Z-0.0625F100.0
N230G1X0.8361Y-1.4543Z-0.0625
N240G1X0.8291Y-1.4958Z-0.0625
N250G1X0.8192Y-1.5692Z-0.0625
N260G1X0.8173Y-1.5894Z-0.0625