Originally Posted by
indredcold
Thanks for all of your suggestions! Still having problems..
I am running in continuous contouring
Checked Z deflection...rock solid, however, with motors powered on, I am seeing about .020- .030 deflection in both the x and y axes, ugh. (Checked for slop in the drive belts, but it appears to be the motor shaft is moving)
Both slaved Y motors are working properly.
I am using vcarve and did switch from Mach 2/3 ARC post processing to the Avid CNC post processor and did seem to get a little better cut. (wishful thinking probably)
Given the deflection of the x and y, would this carry over while running?