By any chance do you have a Frequency Converter (FRC122C) left over from your conversion? I am in need to find one. I believe the part number is Y2C417000.
[email protected]
Doug
Results 1 to 5 of 5
Threaded View
-
11-03-2022, 05:34 AM #5
Member
- Join Date
- Sep 2008
- Posts
- 32
Re: PCMill 100 with intermittent "2520 ORD 1 RS485" Error
Reply With QuoteSimilar Threads
-
LaserCut 6.1 Error "C0000005" when "Download Current CFG"
By lgastmans in forum LaserCutReplies: 3Last Post: 09-11-2020, 05:12 AM -
Fanuc 6MB Spindle controller - Intermittent slow reverse motion when "stopped"
By eriksalo in forum FanucReplies: 2Last Post: 09-25-2018, 04:58 AM -
Me aconsejais esta fresadora "walter 2520"
By plutonn in forum SpanishReplies: 34Last Post: 10-19-2013, 09:46 AM -
Powermax 1000 intermittent "no start" problem
By MoparJon in forum Waterjet General TopicsReplies: 14Last Post: 12-17-2008, 09:59 PM -
Intermittent "Z" axis fault
By eggo in forum Australia, New Zealand Club HouseReplies: 9Last Post: 06-13-2008, 10:51 AM
Tags for this Thread
Posting Permissions
