-
PHNC Parameters lost due to battery failure, help
I have an Amada Vipros 345 with a Fanuc 04PC control. The PHNC control, the sub system that controls press operation, has lost its parameters. I have re-initialized the PMPHU board, got the control to speak english, but it is set to a default turret set up. I have a 45 station Thick turret with 4 A/I, the PHNC thinks i have a 44 station Thick turret.
Which Parameters do I need to change to set this control correctly?
Thank you
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules