Quote Originally Posted by Richiek67 View Post
Hi Folks,

Just wondering if a problem I have is related to MACH3 license , from China, as my programs just
seem to stop dead at about 80%.
Can other GBRL programs support whats in the CNCest 6040 machine does anyone know?
I do have a mini CNC machine with the control board on the back. Turning on the spindle is a manual job
and the machine uses GBRLcontrol for running the code...but it works ok via USB....
Could I use the board on the 6040 I wonder?

Cheers

Richard
Load the real Mach3 and buy the license!

You will have to set it up with the same profile as the Chinese copy has, so write down all the configuration Ports / Pins Etc.