Hi guys just setup my own shop with a okuma mb46vae. Ive ran okumas before but much newer than this so ive got gaps in my knowledge on using the thing. I've been through the operating manual and i think because it has all the old tool data in there it wont let me use the ATC. all other functions seem to be working. So i need someone to help me clear all data and setup the atc and teach me how to do the basics on the machine operation wise. So my main issue currently is ive put my first tool in the spindle and then tried to jog the pot number across to use a pot of my choice and it doesn't seem to move, it has power because LED is on. So maybe im just being silly and I've forgotten the procedure.
So if anyone knows the MB46 well or just the control OSPU100M, that can help contact me here or ping me an email at [email protected] i will surely need guidance along the way so im happy to pay by the hour if I have to just to help me over the phone or skype i can pay direct bank or PayPal.
Need to get this machine going this week coming as my orders are going to start coming in so need to learn, practice and gain some confidence on the machine before then.
Luke Gernon