[tobyaxis]

There are some free videos that you can download from my web site. http://www.tipsformanufacturing.com

Mike Mattera

It's about time you got here, been busy making more awsome Videos ?

[Derek Goodwin]

Here is a link to some learning videos , even though he is a little slow you will get allot of stuff and the price is really good FREE.

link: www.eapprentice.net then go to lessions.

Have fun

Thanks for the plug Jay, I think.
I will be reworking the site, Improving the flow and quality of the videos is one of the main priorities, Stay tuned!

[alain aleman]

Can anyone tell me where to find mastercam mill samples all levels or tell.me where to find samples and tutorials?
[email protected] - to send -me files.

Thanks all

Hi guy, here an exercise to mcx.

http://www.4shared.com/file/4127241/...emplo_mcx.html

Alain

[Drew]

http://www.sarasota.k12.fl.us/brooks...tutorials.html

list of several tutorials

[6105Moss]

Here is another good site, it's geared for mc7 I think but some very good info.

http://info.lu.farmingdale.edu/depts...351/index.html

[6105Moss]

Here is a great site I use all the time for valuable info, (calculators etc)
Not Mastercam related but I'm sure anyone that checks it out will put it
in their favorites.
http://www.martindalecenter.com/Calculators4.html

[cadcam]

Here is another good site, it's geared for mc7 I think but some very good info.

Well all this pictures are from V7 but as of 2004 this was V9mr0304 release.

but some of it will work but if you were trying to look at the picture and follow that you would be thrown.
But if you tryed to use this site for VX or higher this would not help.

[wikedwill09]

I got x2 tutorials!

[Robert M]

I don’t get it ???
You want to share this, or just simply brag
Sharing with a link would be nice !!

[qnet2]

Hello all

im pretty new to mastercam and just upgraded to the max in mill 3
I want to use my Adrive to engrave a globe with the continents
have the dxf dont know how to apply it what toolpath should i use
multiaxis?


thanks