Hi James- soak the bit in caustic and it will dissolve the Al off the tool. Good Luck Peter
Thread: CNC machining soft aluminum
Results 1 to 11 of 11
Threaded View
-
06-14-2023, 10:02 PM #5
Member
- Join Date
- Jul 2018
- Posts
- 6483
Re: CNC machining soft aluminum
Reply With QuoteSimilar Threads
-
What is the best type of aluminum for CNC machining?
By wiredtb12 in forum Material Machining SolutionsReplies: 1Last Post: 03-14-2016, 03:35 PM -
Save time machining Soft Jaws - CNC Chuck Idea
By Joey in forum Mechanical Calculations/Engineering DesignReplies: 9Last Post: 04-14-2009, 10:17 PM -
Problems with soft aluminum
By FinnCNC in forum Material Machining SolutionsReplies: 2Last Post: 10-14-2008, 02:59 PM -
How hard is it to get into CNC Machining small aluminum parts?
By GreasyMidget in forum MetalWork DiscussionReplies: 4Last Post: 10-13-2006, 03:20 AM -
Machining thin wall soft aluminum
By TurboME in forum MetalWork DiscussionReplies: 5Last Post: 03-01-2006, 03:11 PM
Tags for this Thread
Posting Permissions
