The motor is SEM Ferrite Brushed DC servomotor made in England. The end cap of motor reads ( ERO 115 Id.Nr 217 900 04) DR. Johannes Heidenhain Made in west Germany.
I just checked the joy stick for X rapped movement and it checked out OK.
Thanks for any input. Keith
Results 1 to 10 of 10
Hybrid View
-
07-10-2023, 11:50 PM #1
Member
- Join Date
- Oct 2022
- Posts
- 5
Re: X axis runs past end of travel safety switch at startup when power button is push
Reply With QuoteSimilar Threads
-
BMC30 no response when start button is pushed in
By hurco-bmc30 in forum HURCOReplies: 10Last Post: 01-19-2019, 12:24 AM -
End of Travel Switch
By wisconsinjimmy in forum USA Club HouseReplies: 2Last Post: 08-25-2017, 09:42 PM -
How far before the end of travel should I trigger the limit switch
By bkp08817 in forum Mach MillReplies: 7Last Post: 10-26-2012, 03:29 AM -
Edges are pushed out past surface.
By Micro Milling in forum MetalWork DiscussionReplies: 1Last Post: 01-03-2010, 07:26 PM -
Machine still moved in X-axis after E-button pushed.
By M-man in forum Safety ZoneReplies: 6Last Post: 08-01-2006, 03:37 PM
Tags for this Thread
Posting Permissions
