Hi all,
need experts help, I purchased a preowned 2007 Mori Seiki Lathe with MSX-504III controller, its interface in Frensh .
any expert can help me to change the language to English.
Hi all,
need experts help, I purchased a preowned 2007 Mori Seiki Lathe with MSX-504III controller, its interface in Frensh .
any expert can help me to change the language to English.
can you say what type of controller you havr? 16i/18i/21i/30i/31i ?
if not you can find the serial number of the CNC on the back of the monitor
Take a look in your parameter book. If I remember correctly, you should find what you need around #9924.#
Good luck friend,
JR
JR Walcott
Georgia Machine Tool Resources, LLC
unfortunately, Machine without manuals or any book, this is what makes it harder to manage it
could not find the controller type or even the serial number on the back of he monitor, I need to open the cabinet maybe to check inside
thank you, appreciate it
will try this and see if it works, if you have same machine and manuals available for you. I am ready pay for those if you can share a ecopy.
I checked parameter 3102 all bits are set to 0, hence most of the interface screens still in Frensh.
any suggestions
the Parameter 3102 is set to zeros in all Bits, but the interface still in Frensh.
Attachment 495724Attachment 495726
that is not Fanuc parameter problem,is a custom menu made by DMG Mori so must be in the settings of the special menu.If you are not seeying it on menu you need a password from DMG for special acces
Unfortunately, DMG Mori are not cooperating, they are not willing to support. I approach DMG Mori France, DMG Mori NL and DMG Mori ME. no one wants to help me even i send Email to Mother company in Japan, What Only I've got from them check with the local dealer. Whom do not want to help.
What a Bad service They Have in DMG Mori. Any one Ask about their service or service quality should expect nothing and His money Lost. it's simple as that.