Yep. We did all that this evening. Like I said - a dry run
Yep. We did all that this evening. Like I said - a dry run
Hi All,
I ran into a unrecoverable memory error at 007B today, but next to that I suspect some more memory issues.
Before the memory error occurred already, when I looked at the tool table, the DT command shows very weird values (see attached picture)
Also the parameters and the BL values were lost which I have to re-enter every time the machine starts (looks like at least a broken backup battery)
Would a zero memory procedure be sufficient here or would these issues mean a new CPU board?
Any help is very much appreciated
I got some really weird stuff on the screen after I pulled the memory board out to replace the battery. It took a few restarts before I could even get it to start up so I could zero the memory.
I would definitely try the zero memory procedure. I would also recommend replacing the memory board battery if you don't know how old it is.
This video shows how to replace the battery.
https://youtu.be/OuYS4KLvQyk?si=DHiv9W20RDRymONw
This is the battery on eBay https://www.ebay.com/itm/184450539247