Hello All -
I recently purchased a Wasino LG-71 with a Fanuc OT controller. When I went to pick it up, the guy had it pulled in and showed me how to run it a little bit and everything seemed to work just fine. No issues that I could tell. So we loaded it on my trailer and I hauled it home and unloaded it. I have it in my shop and wired in. And now the problems have came out of the wood work.
I am getting the AL-17 alarm on the little display in the control cabinet. From the research that I have completed, I believe that I have to reset and re-initialize the spindle drive parameters. The guy told me that those parameters could be lost if the batteries died or were removed without the power on. I am thinking that the machine bouncing down the road could have potentially caused the batteries to wiggle enough to loose contact long enough to loose the parameters. However, I checked them and they seemed to be in there pretty well with good contact.
Am I on the right path with the alarm that I am seeing?
Where do I go from here?
Does anyone know how I get the parameter list? and what the settings are?
Does anyone have the procedure to complete the process?
The other strange thing is that some times the AL-17 error displays clearly on the display and sometimes the display flickers and you cant read anything. If I turn the machine on for a little while and let it warm up, the display seems to work better.
Any help would be greatly appreaciated!