Servo Drive Control Mode?
Hey again guys,
Sorry, it took a while. Had some paid work in Indonesia and stayed on for a few weeks of holiday and then had to wait to get paid.
But now, I have a bit of an urgent question as there's deal on some used Delta B3 servos and drives I'd like to pounce on.
Basic question but what control mode do we need for basic CNC?
PT (pulse train) Mode?
So, the L version of the B3 drives?
Or do all of them do pulse+direction and perhaps, the control modes are some sort of higher level wizardry which I wont ever need?
Results 1 to 20 of 232
Threaded View
-
12-28-2023, 11:03 AM #11
Registered
- Join Date
- Oct 2016
- Posts
- 116
Re: Granite Base Moving Gantry - Looking For Feedback
Reply With QuoteSimilar Threads
-
Experiments in moving gantry design (Al, steel & epoxy granite)
By Bongodrummer in forum VideosReplies: 3Last Post: 01-20-2022, 11:30 AM -
Moving table vs. moving gantry for routing PCB's?
By zephyr9900 in forum DIY CNC Router Table MachinesReplies: 12Last Post: 10-25-2013, 06:45 AM -
CNC Plasma - Moving Gantry vs Moving workpiece?
By ESDave in forum Plasma, EDM / Other similar machine Project LogReplies: 1Last Post: 02-23-2013, 11:53 AM -
Trade offs between Moving Gantry and Moving Table
By gregmary in forum DIY CNC Router Table MachinesReplies: 11Last Post: 04-22-2011, 07:48 PM -
Moving Table vs Moving Gantry; Dremel vs Router
By chuckknigh in forum DIY CNC Router Table MachinesReplies: 32Last Post: 03-28-2007, 02:48 AM
Tags for this Thread
Posting Permissions
