[Mhook]

Thank you Mhook, I did as you suggested. I also wrung out the cables for the motor and didn't find any issues, but I did notice a resistance measurement of 144 ohms for the X axis tachometer, 68 ohms for Y axis, and 84 ohms for the Z axis tach. Could I have a tachometer issue?

i checked for me and it was similar to your machine/ i think
the lenght of the cable cause it may increase ohm resistance!
the x axis cable is longer than others axis
If the X axis motor swapped with Y axis, you would be sure what the problem is