[antonismel]

Good morning friendly machinists . I have a big experience in heidenhain control where it was easy to meaure and set the zero point with the cycles of the control. After I had an experience with a okuma control. which did not have (free) cycles for measure and set . The seller of Okuma give me some parameters programs to set the machine .Programs like that
N1 G0Z1000
CALL OO83
G0X0Y0
G56 Z50 HA

CALL OO10 PMOD=11 PELI=190 PIN=58 PUDT=10 POVT=15 (PELI= X ? )
CALL OO10 PMOD=12 PELI=140 PIN=58 PUDT=10 POVT=15 (PELI= Y ? )
CALL OO20 PHN=1 PX=0 PY=0
G0Z1000
CALL OO84
M2
Now I am going to work on a MAZAK milling machine and the measure style is poor . Can anyone help me?Can I find program like this for mazak or what i must change to work for mazak? I also found on net Smooth set and inspect from Renishaw for Mazak . Any reviews ?
Thanks for your time and I am waiting for your answers.

[john_mitch]

there should be onboard cycles in mazatrol.

John

[antonismel]

Good morning and thanks for you answer . As I said before I am new in Mazatrol. The cycles in Mazak are very "manual" in my opinion .You should move the axis to touch the item . Those cycles do you mean? Its not an easy going operation.

[antonismel]

I want to ask you something more . Which is the( BEST) way to restart a programm in mazatrol ? I mean when you have a finishing operation (maybe) and you want to start from the middle of a big programm ,how you can do it? The machine is reading the previous operations and blocks ? I am not sure how to do it. Thanks .