My prdoucts cutting time is like 15 sec but starting spindle and spindle stop take extra 15 sec.
Check the Mach3 configs - I forget which tab. There is an option to vary the motor start and stop times.
Cheers
Roger
Results 1 to 3 of 3
Hybrid View
-
05-26-2024, 11:18 AM #1
Member
- Join Date
- Jun 2010
- Posts
- 4262
Re: Gcode that spindle does not turn off at the end of the cycle
Reply With QuoteSimilar Threads
-
Need help to modify gcode so spindle does not turn off at the end of the cycle
By rodjava in forum G-Code ProgramingReplies: 10Last Post: 03-31-2019, 01:41 PM -
M4 Lathe Turn Cycle with Threading (Prog hangs at end)
By MegaMoog in forum Mach 4Replies: 2Last Post: 03-10-2019, 09:01 PM -
How to change what M2 does, DRO going to Zero (0) at end of GCode program.
By jeffserv in forum Dynomotion/Kflop/KanalogReplies: 6Last Post: 01-25-2014, 11:41 PM -
END OF CYCLE SIGNAL
By 300blkout in forum Daewoo/DoosanReplies: 0Last Post: 10-04-2012, 05:12 PM -
Gcode Turn A axis CCW
By kNucklBustr in forum Mach Software (ArtSoft software)Replies: 9Last Post: 09-24-2012, 06:47 PM
Tags for this Thread
Posting Permissions
