Hi
Can anyone help? I need parameters for Siemens 810T (General Numeric) control. for my Hardinge CHNCI lathe,
Thank you!
Hi
Can anyone help? I need parameters for Siemens 810T (General Numeric) control. for my Hardinge CHNCI lathe,
Thank you!
I'll get them ready for you.
Mike
Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28
Hi Mike,
You are a star,Thank You!
Hi Mike,
Thanks, I will sort a drink for you?
Allen.
Hi,
Are these parameters still available? would be much appreciated
.
L.S. Tool & Precision Inc.
Taking machining to the
next level, combining creativity, ingenuity and the technology of CAD/CAM & CNC Machining
“When ingenuity makes all the difference”
http://hometown.aol.com/lstool1/myhomepage/business.html
Thanks Allen,
My Email address is [email protected], you have one of these machines running in your shop?
L.S. Tool & Precision Inc.
Taking machining to the
next level, combining creativity, ingenuity and the technology of CAD/CAM & CNC Machining
“When ingenuity makes all the difference”
http://hometown.aol.com/lstool1/myhomepage/business.html
Hi,
Sent you parameters via e-mail, It took me a couple of attempts to understand and load but I know they work! follow the instructions carefully!
Yes I do run a Harding CHNC 1, it is a good machine for its age, still very accurate, still produces nice work, a few reliability issues but nothing major, lots of
spares turning up on E-bay now to, the only thing I do not like about it is the machine consumes so much air, you need a bloody good compressor!
Kind Regards,
Allen,
Are the parameters still available?
Hi,
Yes I have them, if you give me an e-mail address I can send them to you,
The parameters are for the Siemens 810t control and worked fine on my machine
Regards, Allen.
Thank you very much!
my email is [email protected]
Really appreciate it.
Does anyone still have parameters for the CHNCI, Fanuc Ot, 1991 vintage? We lost our battery and have not been able to get any help.