Yes AJESMS is great with post processor work and is always willing to help for that question to get you going.
He has done several jobs for me
Yes AJESMS is great with post processor work and is always willing to help for that question to get you going.
He has done several jobs for me
need post for doosan dnm350_5ax,please PM me.
Ajesms has been a real help with my posting issues! Always available with suggestions or tips....if you need help, this is the person you NEED to talk to!
rog.
Ajesms just did a 5 ax post for my 1999 DMG DMU50v that works great! Not a simple feat as Ive got the older Millplus 4.00 control so it doesnt have a lot of the internal 3d math capability that the newer controls have. A pleasure to work with.
Hello!
Looking for post for a Goratu Lagun GBR 4 with heidenhain TNC530
It has a head that turns in 2.5degres steps.
Yes i could help you.
My email is [email protected]
Enviado desde mi iPhone utilizando Tapatalk
Hello. Did you recive my email?
Skickat från min iPhone med Tapatalk
HI
how much the compost4
hi
how much the compost4
hi newbie here can any one help with a post processor for mastercam x2 machine is a bridgeport vmc 560 with a tnc 370 control
if you need a good postprocessro feel free contact me.
Marce, Hi, want to work on another gibbs post for me? Simple!!, just a 2 axis lathe ezpath III control. The post I have is not too far off but this control is picky!
I have a Miyano BNC 12 (Model# A02B-0072-B501) with a Fanuc controller. The battery died and we've lost all of the machine side parameters. Does anyone have a copy they can send me?
Need help to modify our current post file for a Fadal Mill 4020 with 4 axis rotary table. Our older rotary table was a Fadal VH-65 with a gear ratio of 90: 1 and we are replacing it with an Index Design rotary table VH-6 that has a gear ratio of 60:1. Using GibbsCam
Email?
hi im looking for a gibbs post processor for a mori seiki nl2000 year 2005 thanks
yes i need a post for gibbs for mori seiki nl2000