[GastonSWE]

Hi,
My first "real" post here!
I have become a happy new owner of a VMC-100. I have done manual programming for a few months now and want to try out CAD/CAM to speed up the process. As I'm a hobbyist I don't really run a lot of runs for each part and need new code quite often I want to speed up my process.

As Autodesk Fusion 360 is a combined CAD/CAM that is freely (as in beer) available package for students/hobbyists I think it is the best option for me and my trusty Emco.

To get from the CAM stage to the G-code we need a post processor. I have started to develop a post processor on my own but my experience in both CAM and G-Code is decimal at best. At any odds, if you wish to participate in private or in public I have started a thread on Autodesk's CAM-forum.
Emco Maier VMC-100 Postprocessor including initial try with small improvements

If you wish to remain private just PM me with ideas and/or suggestions.

[GastonSWE]

Old link is dead and I can't seem to edit the old post:
https://forums.autodesk.com/t5/hsm-p...h/td-p/6084365