603,358 active members*
3,694 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > Commercial CNC Wood Routers > Multicam Machines > Stuck at “Service in Progress” on startup.

Thread: Stuck at “Service in Progress” on startup.

Results 1 to 1 of 1
  1. 12-19-2024, 05:51 PM #1
    rugbyal
    rugbyal is offline Member
    Join Date
    Apr 2006
    Posts
    24

    Stuck at “Service in Progress” on startup.

    We have a Multicam 5000 series Router.
    Today on startup the screen on the pendant is stuck on “Service in Progress”. It goes through enabling the spindle and stops with this message.
    You can’t exit out.
    Any ideas before I spend half a day on hold with tech support.
    Reply With Quote Reply With Quote
  2. 12-20-2024, 09:23 AM #2
    cncmakers001
    cncmakers001 is online now Member
    Send a message via MSN to cncmakers001 Send a message via Yahoo to cncmakers001
    Join Date
    Jul 2011
    Posts
    755

    Re: Stuck at “Service in Progress” on startup.

    Completely power off the machine, unplug it for a few minutes, then plug it back in and power it up again.
    This can sometimes clear out temporary glitches.
    http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules