[ordibeheshd]

I’m working for a cabinet company which has Weeke vantage 33 machine and we use Mozaik to design and make toolpath for this machine.I’m being hired recently and unfortunately there is a problem with machining process. After activating the MPR file in MMC unfortunately it doesn’t run and shows error in the table in front of the file. However it doesn’t do the same for every design and file. Some designs get activated with no problem and machine starts cutting them. Anybody has ever experienced this problem? Is that the problem with the Mozaik or the MCC?btw the Weeke software is woodWOP 5.0