Quote Originally Posted by seemack View Post
I've got a aliexpress probe working on the tnc151/155. Just need to get the M23 x 7pin plug for the back and connect all the wires up. Probe is wireless. There's MP's that need to be set that the manual explains. Have now got probing cycles in the programming to set the job up which is not parallel to the axis which is very nice.
I've also made a program to probe the table and send results to the computer to find the table is flat within 0.0015". Not bad for 40 year old Bridgeport Interact 1mk2 with TNC 151 (with eprom 6 from a tnc155 to enable the probing functions) I have copies of all 6 eproms stored on computer now.
That is good. Would you mind sharing ?.