I don't know where to post this. Sorry if this is the wrong place.
Has anybody got a DXF (or another format) of the CNCzone logo.
I only want it for a bit of fun. Not anything commercial or inappropriate.
I don't know where to post this. Sorry if this is the wrong place.
Has anybody got a DXF (or another format) of the CNCzone logo.
I only want it for a bit of fun. Not anything commercial or inappropriate.
There's some 3D g-code of it around here somewhere, but I haven't seen it in a long time.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks. I may have to fiddle with that and burn it out on the plasma, just for kicks. A 3D model in aluminum would be real nice as well!
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
"If the women don't find you handsome, they should at least find you handy"
-RedGreen show.
That link is all about a gcode for a 3D profile.
I was wanting a 2D DXF or such so I could do a simple Vee carve representation of it
Just put everything on one layer and make it 2D? That's what I will do.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
"If the women don't find you handsome, they should at least find you handy"
-RedGreen show.
I don't have any program that will open the IGS file.
If you do that can you post it?
dxf
Well, he ^^ beat me to it. I was still working on it.
I am going to try and finish converting the one linked to above, if nothing else because it is being a pain.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
"If the women don't find you handsome, they should at least find you handy"
-RedGreen show.
Here ya go. This is the new logo on the top of the forums. The others are the old Logo.
I made a DWG and DXF for everyone and also a simulation in V-carve Pro.
Enjoy ! ! !
Joe
Hey thanks a lot Holbieone, Massajamesb and Joe for your efforts.
Unfortunately the little fun project I wanted it for proceeded without it.
See this post to see why if your curious.
http://www.cnczone.com/forums/showpo...3&postcount=82
Any way it is sure to be useful to lots of others.
cool video
Hi
use ur mouse , right click on ( any picture ) cnczone logo and save , when you right click on it a menu pops up hit save function and now you have the option of saving the file and renaming it to what ever you want and saving it to what ever section of your PC you choose too.
now you have the picture saved on you PC
after this i dont know how to convert it to G-code , i suspect its a case of having to import the picture file into a g-code converter program
cheers