Hi, Can anyone please help me figure out which wires to use to connect my stepper motor to my driver. The driver has green(A), white(A-), black(B) and red(B-) wires from it and the amperage can be adjusted from a minimum of 0.7 and up with dip switches.
The steppers label says:
brother
BH-100-42-34-X
L210803
127S80363 H
041393
made in Japan
and has red, yellow, blue and white wires from it. Can anyone tell me how to hook it up properly? Is there a way to use an ampmeter to figure it out? How much power should it take?
Thanks, Peter