We lost the parameters in our fanuc O-M control.
We restored all parameters and diagnostics.
Now the cutter comp doesn't work.
When g41 is read, control alarms out with p/s 10 unusable g code.
Is there a parameter turned off for g41 g42
We lost the parameters in our fanuc O-M control.
We restored all parameters and diagnostics.
Now the cutter comp doesn't work.
When g41 is read, control alarms out with p/s 10 unusable g code.
Is there a parameter turned off for g41 g42
im also working on this problem- this machine (miyano TSV-35 fanuc O-M) shows that g41 and 41 are options so im thinking there must be a way to turn these options on. there is also a p;lace in the book that says these codes are part of "group 7" is there a parameter that chooses which groups of g-codes to use?
Check Para 907 BIT #6 x1xxxxxx
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
bingo! Thank you very much.... now i can tell my boss im the hero ha ha ha ha ha ha beat ya to it sgrove no really- we do appreciate it. now i gota go back and re- re program the cutter comp back into the programs