Hi,
One of my customers recently aquired a very used Mitsubishi MH-50E machining centre, but it had to be transported some 1500 km, so the electrical cabinet was removed to reduce the width on the truck.
Anyway, to cut a long story short, the servos and scales were disconnected, and now the machine has a Z70 abs alarm active. Unfortunately, not all the manuals are with the machine, and I have tried with no luck to find info to rectify this on the net.
The machine has a Meldas 500 control (M520, iirc), but the only info I can find refers to a menu option (ABS-SRV) which does not appear on this machine. Does anybody know how to turn this on, and/or have instructions for resetting the zero (home) position for this machine?
Any help would be greatly appreciated.
regards, Oz