I want to present my project, I want to design and build a motogp or F1 engine (only a single cylinder research engine at the moment).
Target of my project :
Power output: 226HP (56.5HP @ 17000RPM) x 4 cylinder
Unitary displacement: 200cc
Maximum RPM: 18200RPM at 23.5m/s mean piston speed.
BMEP: about 13.5 Bar, more than 130% volumetric efficiency
Some stages of the project:
- Design and test valve train to rise up 18500RPM, it is better idea to test it with head not installed on engine, for example a electric motor driving camshaft.
- Design of bell mouth, throttle body, intake port, valve and valve timing to get more than 130% % of volumetric efficiency at 14500RPM, a CFD model could useful.
- Build, test, and fine tune a single cylinder research engine on dyno. Some tools to measure chamber pressure, volumetric efficiency, and intake, exhaust pressure pulses will be absolutely necessary.
I have making drawings in SolidWorks, i can share my designs if you want to help me. I have 31 years and to design hi-end racing engines is my dream.
http://www.sportdevices.com/arbizugp/puertos.jpg
First part machining:
http://www.sportdevices.com/arbizugp/mecanizado2.jpg
It is a expensive hobby for me and i am looking for financing for this project here in Spain, there are some serious motogp projects here in Spain, but it is dificult.
I have a f1 piston (ps01 minardi coswoth) and valve set of this engine! to use as starting point.
Any help will be welcomed
Jlcortex
http://www.sportdevices.com/jlcortex/