Hi. I'm looking for help with some aluminum/metal parts to help me complete my cnc router project. I have the rails for all the axis. I'm planning to build a box out of 8020 material for the x surface. Here's what I need help with:
1. I need to mount my y-axis rail on a 48"x 4" piece of aluminum. Basically cut to the above dimension and tapped to mount my THK rail.
2. I need to mount the above y-axis to my x axis rails
3. I need 2 nema 34 motor mounts and other smaller parts
4. I need to build a stable table/cabinet to set my machine on
If you are in Colorado springs and could help, please let me know.
thanks..
jim.
Results 1 to 3 of 3
-
08-25-2007, 11:06 PM #1
Registered
- Join Date
- Mar 2007
- Posts
- 84
RFQ: Help me finish my cnc router in Colorado Springs
-
08-27-2007, 10:14 PM #2
Registered
- Join Date
- Mar 2007
- Posts
- 84
The above is basically what I need to finish my project. I would like someone to come by, take a look and give me a quote..Just reading my own post, I'm not asking for free help
-
09-06-2007, 05:47 AM #3
Registered
- Join Date
- Sep 2005
- Posts
- 28
Sent PM.
Chad
Reply With QuoteSimilar Threads
-
medium duty DME springs
By spider in forum MoldmakingReplies: 7Last Post: 08-16-2007, 05:40 PM -
Gas Springs on X3 - your ideas...
By Ninhil in forum Benchtop MachinesReplies: 3Last Post: 05-21-2007, 07:00 PM -
Finish Cut How too ???
By Biggermens in forum BobCad-CamReplies: 6Last Post: 05-01-2007, 01:59 AM -
Springs
By CNCMike in forum SolidworksReplies: 6Last Post: 03-20-2007, 05:25 PM -
Metal Supplier in Colorado Springs - Where?
By creative_mind in forum MetalWork DiscussionReplies: 3Last Post: 02-02-2005, 08:03 PM
Posting Permissions
