Originally Posted by
aussie28
I want to set up work shop wherethe it will be all Haas or all Doosan machine
This is a good principle especially if you have to train your own people from scratch. But as PBMW says don't let it blind you to the fact that the machine should suit the job. I have all Haas and I am happy with them but the largest and strongest material I machine is 2-3/4" leaded steel and 90% of what we do is 6061 round bar 2-5/16" and 2-1/16"; a machine capable of really heavy work is not needed.
An open mind is a virtue...so long as all the common sense has not leaked out.