Line numbers are a switch. Look for
Code:
omitseq : 1 #Omit sequence no.
and change it to 0 instead of 1
Lots of the basic stuff is right there, just switches you toggle on or off. There's pretty good descriptions of what they do with them.
Feel free to as any other questions you might have, I've got MP running thru meh veins.
'Rekd
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)