So I have started to acquire some of the funds to convert my HF 7x mini lathe. I downloaded the plans from http://jfettigmachines.com/
So what size steppers should I use for these plans?
Thanks
So I have started to acquire some of the funds to convert my HF 7x mini lathe. I downloaded the plans from http://jfettigmachines.com/
So what size steppers should I use for these plans?
Thanks
FROM THE PDF FILE PROVIDED ON THE WEB SITE.
The motion equipment that I suggest are stepper motors from Automationdirect.com or any other Nema 23 Stepper motors near or greater than 200oz-in. There are a wide variety of drives that could be used. The top quality drives are Gecko Drives which are about $114 per motor. Xylotex has a 3 axis board that will work good with this kit as well.
Doh. I should have read just a little further! Thanks!