587,948 active members*
4,155 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking > MetalWork Discussion > Share Your Files Part or Art
Results 1 to 20 of 11734

Hybrid View

  1. #1
    Join Date
    Mar 2003
    Posts
    35538
    Quote Originally Posted by grinder_gary View Post
    I realize that the Moderators are trying to do what they think is right, BUT maybe they should talk to Paul and see about getting the right info from a creditable source. How about asking a copyright lawyer!!! I really think that 99% of the images posted would not be considered copyright infringement. The basic problem with all the information going around it that most is not right and there is nobody willing to check it out.
    Did I miss something here? I'd say that well over 99% of the images posted here are still here. What exactly are you referring to? The Air Force post? Forum rules say no Copyrighted or Trademarked images. The Air Force logos are Trademarked. And Sorry, but we don't have time to check for copyrights on every image posted here. That's the members responsibility to not post them. What I do, is assume all company logos and cartoon and comic characters are copyrighted material, which more than likely 99.9% of them are.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  2. #2
    Join Date
    Jul 2006
    Posts
    141
    Quote Originally Posted by ger21 View Post
    Did I miss something here? I'd say that well over 99% of the images posted here are still here. What exactly are you referring to? The Air Force post?
    Ger21, I am referring to the fact that as this thread started, there has been nothing but copyright issues. Why can't someone get this straightened out now before people stop posting. I have seen copyright material that has been removed, but when people remove their post because of all the bellyaching about copyrights, then I think something should be done.
    As for the Air force post, no that is not the issue as I have not checked that one out.

    What I am saying is that if people wish to post dfx files then lets get a clear ruling on what is COPYRIGHT and what is ok to post. That is what I am talking about.

    Just my 2 cents worth

  3. #3
    Join Date
    Mar 2003
    Posts
    35538
    Quote Originally Posted by grinder_gary View Post
    Ger21, I am referring to the fact that as this thread started, there has been nothing but copyright issues. Why can't someone get this straightened out now before people stop posting. I have seen copyright material that has been removed, but when people remove their post because of all the bellyaching about copyrights, then I think something should be done.

    I don't know who was complaining, but Switcher removed the posts, and I don't think the moderators had anything to do with it. If he posted the image, then he can check if it's copyrighted or not.


    Quote Originally Posted by grinder_gary View Post

    What I am saying is that if people wish to post dfx files then lets get a clear ruling on what is COPYRIGHT and what is ok to post. That is what I am talking about.
    Again, that's the users responsibility. The only way to know for sure is to contact the author or owner of the images, or characters or logos.

    And I wouldn't say there have been nothing but problems with this thread. Very few images have been removed.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  4. #4
    Join Date
    Jan 2007
    Posts
    355
    Gerry,

    If there had been a big TM or (c) on the image, would that be acceptable? Not being sarcastic, just curious.

  5. #5
    Join Date
    Mar 2003
    Posts
    35538
    Quote Originally Posted by Eurisko View Post
    Gerry,

    If there had been a big TM or (c) on the image, would that be acceptable? Not being sarcastic, just curious.
    No. Read the forum rules.


    COPYRIGHTED OR TRADEMARKED MATERIAL:
    It is illegal to post any content that is copyrighted or trademarked, unless you hold the copyright or trademark. Any material protected by copyright may not be posted in the message boards without the expressed permission of the author or owner of the copyright on that material. This includes reproducing the full text of news stories, articles, etc. It is acceptable to provide a link to copyrighted material, to post brief excerpts, or to paraphrase other works, though we do strongly encourage you to cite the original source whenever possible.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Similar Threads

  1. Share your 3D Carving files, Parts or Art
    By yohudi in forum WoodWorking Topics
    Replies: 599
    Last Post: 11-17-2016, 08:42 PM
  2. Lada
    By multiple in forum MetalWork Discussion
    Replies: 0
    Last Post: 01-18-2014, 11:00 AM
  3. Lets Share!!!!! (cut files)
    By Dustin407 in forum Waterjet General Topics
    Replies: 9
    Last Post: 08-24-2011, 11:46 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •