A little more progress today. Last night I fussed with the placement of the components, to get a little idea of what I'm dealing with.
Then this morning I started working on the steel tubing for the router's table, first I made the four pieces that have a 45° on one end only. Then I milled the two pieces with no angle at all. Then I realized I had ordered the wrong length pieces for the bottom center tube. The one's I have are an inch too short! (brain fart ) So I quickly ordered two more pieces!
Next, I made a careful layout on the table base, and checked everything three times! Then I used my Saws-All to cut the steel section out. and deburred everything with my 2" disk sander. Now I have to wait another five days to get the missing steel tubes! They should be here Monday evening.
Widgit