Thanks for the input. I have looked at Roton and contacted them, they do not provide machining services. I am finding most places that sell them do not provide machinig services. I will most likely need to find a machinist locally.
Thread: Machining Ball screw ends
Results 1 to 5 of 5
Hybrid View
-
05-06-2008, 01:30 PM #1
Registered
- Join Date
- Oct 2007
- Posts
- 31
Reply With QuoteSimilar Threads
-
Machining/Turning the ends of ground ballscrews
By rodjava in forum Linear and Rotary MotionReplies: 11Last Post: 12-06-2007, 05:08 PM -
How do you turn-down the ends on a ball-screw?
By samualt in forum MetalWork DiscussionReplies: 12Last Post: 10-15-2007, 04:41 PM -
machining ball screw
By KEYTEEM in forum Linear and Rotary MotionReplies: 25Last Post: 08-30-2006, 12:27 AM -
Machining the ends of ballscrews & ball screw size
By Zumba in forum Linear and Rotary MotionReplies: 4Last Post: 02-15-2006, 05:47 PM -
Machining threaded shaft ends.
By edbo68 in forum DIY CNC Router Table MachinesReplies: 6Last Post: 04-29-2005, 03:44 AM
Posting Permissions
