Hi guys I have just recently bought some motors and im a little confused about what kind of power requirements im going to need im really electronics savvy but im just used to working with low voltage and amperage.
Here are the motors I have http://www.allelectronics.com/cgi-bi...DEG_STEP_.html
the specs that i have found:
1.8 Degree step
1.8 Volt
4.2 Amp
0.42 Ohm
127 Oz/in holding tourqe
So now im looking for a DIY/Opensource Controller that will fit my needs... or something i can modify. Im New at stepper motors and dont quite understand them fully yet. So please be gentile